I’ve used Tutoro chain oilers for a number of years now. The great thing about them is the simplicity. They have no requirement for 12v power or vacuum from the inlet manifold like many other oilers do, they just use the natural up and down motion of the bike to control the oil flow.
The Tutoro oilers come with most of the fittings that you’d normally require however, none of them really worked on the Tenere 700 and it was soon obvious that I was going to have to make a mounting bracket for it.
Heading off to the workshop with nothing but a rough idea of what I needed, I grabbed some sheet metal and started making the mounting bracket. I used a piece of 4mm sheet metal as I wanted it to be a really solid mount so that it could handle the rigours of trail riding.
The best place to mount the oil reservoir was on the rear of the Outback Motortek pannier rack. At the point where the rear support crossbar is bolted to the left side tube there are two convenient long bolts that lend themselves perfectly to being used to mount the bracket. Spacing is tight but, with a little tinkering it fits perfectly. I had to make a couple of plastic spacers to get the position of the reservoir correct such that the flow adjuster knob didn’t stick out to far to ensure clearance when the pannier is fitted. I made the spacers from a piece of plastic rod I had on the shelf in the workshop, cut to size and then drilled the centres out so that the bolts could slide through them.
Once the final shape was reached, I cleaned the bracket up and gave it a quick spray with some black plasticoat paint to protect it from rust and then hung it on the washing line in the sun to dry.
Whilst the bracket was drying I started running the oil feed hose around the frame. I’d already worked out the route and decided that the Acerbis chain guide provided the perfect mount point for the oil delivery nozzle.
Running the oil delivery tube around the frame and swing arm was an easy task using a mix of cable ties and heavy duty stick on clips. I’ve fitted the tube on my other bikes using the same technique and have never had any issues even when riding off-road.
Having the Acerbis chain guide fitted was a real bonus as it provides the perfect secure route right up to the rear sprocket. Needing just two small cable ties the tube was fed through the upper part of the chain guide and then down by the side of the sprocket. This not only provides a secure fixing but, also protects the feed nozzle from flying debris.
Once the tube was in place and the new bracket was dry I got it all mounted and bled the oil through the tube to the delivery nozzle.
The Tutoro supplied brackets usually mount to just a single point on the reservoir but, since there are two mount holes on the base of the unit I decided to use both to get a much more solid fixing. Knowing what the trails are going to be like in Mongolia and Siberia I wanted to ensure the fixing was as solid as possible.
With another fun little project complete I’ll be moving onto the next one very soon.